Shop
BodyGard S60 50ml
Masterpiece of TEVO and formulated with only the highest standard of raw materials. The perfect formula provides maximum protection to car’s painted surface with ultra-thin glass coating. Contaminations are unable to adhere to the coated surface easily. The performance of BodyGard-S60 does not deteriorate and affect by weathering nor ultraviolet rays for up to 5 years, it offers extraordinary water repellence and superb gloss finishing.
| Weight | 0.2 kg |
|---|
Technical Info
Physical : Clear Liquid (Solvent Based)
Colour : Transparent
Odour : Moderate
Finishing : Glossy
Durability : Up to 5 years
Coating Thickness : 2 – 2.5 Microns
Hardness : > 8.5 H
Contact Angle : > 100 degrees
Coverage : 200 m²/ Litre OR 50ml / 2 cars
Shelf Life : Sealed 12 months / Opened 1 month
Curing Time : 24 hours for surface drying/ 5 days fully care
Layer : Multiple for better scratch resistance
Application : Apply and buff
How To Use
Use TEVO Cleaner & Polishing Series to remove any scratches, water spot, scale and iron particles. Rinse off the degreaser completely with water. Make sure the surface is completely dry. Iron particles removal and polishing steps is crucial to maximize the performance & glossiness of the coating.
Step 1 : (Coating)
Soak the coating onto the application sponge or dry application tissue/towel. Apply small section at a time by dragging the coating horizontally (Left to Right) once and vertically (Top to Bottom) once. Make sure the coating covers every part of the surface.
Step 2 : (Buffing)
Immediately, use a microfiber cloth to buff the coated surface, do not pressurize the buffing process. Buff off completely until there is no visible striking or lining. (If you have hard time buffing off the striking and lining, recoat the particular surface again with step 1)
Step 3 : (Finish)
Wait for a minimum of 60 minutes for the coating to cure and bond with your surface; for best performance, allowing the coating to cure for 24 hours. Try to rinse through the surface with water and you will notice the amazing water beading and hydrophobicity results. If you wish to apply a second layer, Repeat Step 1 to 3 after 60 minutes.
